PRG Vx76 User Manual 3.6 - Manual (Page 41)

VX76 SOFTWARE USER MANUAL 25
Device Pairing
For proper operation, the software must pair with different pieces of hardware within the console. This process is
completed during the console's installation, but may need to be paired again if internal devices are changed.
Pairing console devices can be accomplished as follows:
Step 1. At Setup menu, select Pairing. (Pairing window will open.)
Step 2. Click Pair Devices button.
Step 3. Disconnect external system networking (Ethernet and/or fiber) from back of
console and press Scan to continue.
Step 4. Once all devices have been discovered, click Pair to complete the pairing
process.
Note: Some devices, such as the Vx76 DMX Interface, are optional, and may not be installed on the console.