PRG Vx76 User Manual 3.6 - Manual (Page 210)

194 VX76 SOFTWARE USER MANUAL
Creating Effects Using Set/Sequence Edit Screens
If sets and sequences are pre-stored, an effect can be created at a later time using the Effect Edit screen.
Create an effect using Set/Sequence Edit screens:
Step 1. Press [Edit Set] button to open Edit Set screen.
Step 2. At palette, select required set.
Step 3. Press [Edit Sequence] button to open Edit Sequence screen.
Step 4. At palette, select required sequence.
Step 5. Press [Edit Effect] to return to main Effect Edit screen.
Step 6. Press and hold [Store] while pressing

Effect Select Button

. This will store the set and sequence selections
into that effect number.
Groups as Effect Sets
A Group can be used as a Set within an effect.
Guidelines:
+ Groups must be chosen from the 20-up palette in the Effects screen.
+ How a group is arranged determines the parts of the effect, e.g. a group with an arrangement of 2 divisions with 5
channels in each division will transfer to the effect as 2 parts with 5 channels each.
To specify a group as a set:
Step 1. At Effects super palette, access Group palette.
Step 2. Select a group. (The chosen group will be associated with the effect instead of a set.)
The command line can also be used to associate a group to an effect using the syntax: [Effect] # [Group] # [Enter].