PRG Vx76 User Manual 3.6 User Manual
Page 216
200
VX76 SOFTWARE USER MANUAL
Update a preset with QuickFocus:
Step
1. At front panel, press [QuickFocus] toggle button (button will flash)
or
at Special
menu, select QuickFocus. Console will assume QuickFocus mode.
Step
2. Select required preset by using preset select or keypad. All luminaires that have
data from that preset will be selected and will bring up the preset live.
Step
3. Press [Next]*. First channel will stay active, while all other channels go to inactive
state.
Step
4. Modify focus or other parameters as required.
Step
5. Press [Next]* to go to next channel. When the last channel with stored
information has been brought up and adjusted, pressing the [Next]* button activates the entire modified
preset.
Step
6. Re-store preset to save changes using Update, Selective Store or standard Store commands.
Step
7. Press [QuickFocus] toggle button again to deactivate mode.
* Or [Last] as required.
Quick Focus
Toggle Button