Fanned timing and delays, From encoder, From keypad – PRG Vx76 User Manual 3.6 User Manual
Page 108: From encoder from keypad, Must, Example, Through, Delay] can be used instead of [time
92
VX76 SOFTWARE USER MANUAL
Fanned Timing and Delays
Timing and delay attributes can be "fanned" into channel selections using the soft encoders or command-line keypad.
This function works in conjunction with the Function Filter. The parameter you are working with
must
be selected in
the Function Filter.
From Encoder
Step
1. Using Function Filter, set parameter filters.
Step
2. At soft encoder window, turn Fan on by holding down [Fan] button or double-clicking [Fan] button.
Step
3. Select required channels.
Step
4. Rotate encoder to set value.
Figure 4-1: Fan Button
From Keypad
Step
1. Using Function Filter, set parameter filters.
Step
2. Select required channels.
Step
3. Press [Time]* [m] [Thru] [n] [Enter] - evenly distributes the time setting across the channel selection
m
through
n
.
* [Delay] can be used instead of [Time]
Example
:
[Time] [1] [Thru] [6] [Enter] - fans time across current channel selection, following fan type, with the first channel
starting at 1 second and the last channel starting at 6 seconds.
1
2
4
3
5
8
6
7
9
10
11
12
14
13
15
18
16
17
19
20
Fan
Effect
Frame
Image
Slow
3D
Beam
Shift
Grid
Dynam
Color
Bank
Func
Fan Button
Note: The V676 console is shown in this example, however, this button is
found on all Vx76 console front panels.