PRG Vx76 User Manual 3.6 - Manual (Page 326)

310 VX76 SOFTWARE USER MANUAL
Default Explanations
Emergency Action
Default : Do nothing (remain in current state)
This setting determines what event is to occur if communication is lost between the console and the luminaire/
interface devices for longer than 15 seconds. This information is sent upon console start-up in case of an emergency.
You may determine one of the following:
+ Do nothing. Luminaires will do nothing.
+ Fade out in n seconds. System will fade out in the specified number of seconds.
+ Go to Cue n. Luminaires will assume the specified cue action.
Startup Action
Default : No startup action
This setting determines what event is to occur upon power up of the console. You may specify one of the following:
+ Macro. Console will execute the specified macro.
+ Snapshot. Console will execute the specified snapshot.
Date/Time Stamp
Sets the computer’s internal date and time values for the console.
Units
Default : English
This sets the unit of measure, used with the 2D/3D location configuration.
Palette Store Options
Default : Lowest Active
This setting tells the console whether to draw data from lowest active or lowest selected channel during a Beam or
Color store operation.
The "lowest active" setting draws data from the lowest channel number with intensity of that type, regardless of
selection. The "lowest selected" setting draws data from the lowest selected channel number of that type, regardless
of intensity state.
Use of Filters with Color Store
Default : Filters not used
This setting defines whether or not function filters impact Color palette store operations.
Buttons/Keys
This setting defines which direction the keypad cue arrows will go.
Timecode Autoswitch
Default : Off
This setting defines whether the internal timecode clock will takeover or not when an external signal is lost. (Enabled
when box is checked.)