PRG Vx76 User Manual 3.6 - Manual (Page 308)

292 VX76 SOFTWARE USER MANUAL
Freeze
The Freeze feature halts an event in mid-transition.
Note: If a cue is stored while a submaster is frozen, the end goal of the event will be the data stored.
While in Freeze mode, an indication will be shown in the submaster’s display:
Freeze a cue using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Select

Freeze

checkbox. This will instantaneously halt the cue or effect.
Step 3. Press

Close

to close Setup screen.
Step 4. Press the [Run] button to resume cue, or press [Back] button to fade to previous cue on that submaster in
associated time values, (unless timing is filtered).
To release a submaster from Freeze mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Deselect

Freeze

checkbox or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
Modes