PRG Vx76 User Manual 3.6 - Manual (Page 331)

VX76 SOFTWARE USER MANUAL 315
Channel Partition
Channel partitioning allows an operator to define a specific collection of channels to work with exclusively. While a
partition is loaded, only those specified channels may be controlled, stored or played back from that console.
Load a channel partition:
Step 1. Select required channels.
Step 2. At front panel, press [Load Partition] button or at Special menu, select Load
Partition. The quick bar label will turn yellow and indicate the number of
channels currently loaded in the partition.
Add channels to a partition:
Step 1. At Channel Select panel, select current channels by pressing [All].
Step 2. Select channel(s) to add.
Step 3. At front panel, press [Load Partition] button or at Special menu, select Load
Partition. (Channels not currently in the partition will not light up, but will be
selected to add to the partition.)
Remove a channel partition:
Step 1. At Channel Select panel, deselect all channels by
pressing [Clear].
Step 2. At front panel, press [Load Partition] button or at
Special menu, select Load Partition.
Step 3. Confirm alert.
Load Partition
Button