PRG Vx76 User Manual 3.6 - Manual (Page 194)

178 VX76 SOFTWARE USER MANUAL
Editing Effects
A store action will be required when making modifications to an existing effect. When changes are made, *Mod* will
be displayed next to its number on the Effects Edit screen along with yellow text/boxes to indicate that a store action
is necessary to save the changes.
Important! A modified effect could be loaded and played back in a submaster, but if it is not re-stored, all changes
will be lost.
To edit an effect:
Step 1. At Effects palette, select effect. (A white box will appear around the selected item.)
Step 2. Make changes as required.
Step 3. Press and hold [Store] while pressing

Effect Select Button

to store changes.
Keypad shortcuts:
+ Press and hold [Delete] to clear either a sequence step or a set part.
+ Press and hold [Copy/Move] to copy sequence steps or set parts.
+ Double-click and hold [Copy/Move] to shift all sequence steps or set parts.
+ Double-click and hold [Copy/Move] to insert/remove sequence steps or set parts.
+ Using [Group] with a set part will select channels in the part as an Ad Hoc Group.
+ Using [Group] with any effect in the Effects palette will select ALL channels in the effects' set as an Ad Hoc Group.