Fan mode, Dynamics by pressing, Stop all – PRG Vx76 User Manual 3.6 User Manual
Page 172
156
VX76 SOFTWARE USER MANUAL
Step
6. Randomize the dynamic by applying a fan:
a.
Open Function Filter by pressing "filter" in central touchscreen.
b.
Select parameter(s) to fan.
c.
Press
fan mode
button to choose fan type: Left fan, Right fan, Center fan, Ends fan, and Tilt fan.
d.
Press and hold [Fan] button while turning an encoder. (Refer to
on page 71 for more detailed
information.) The dynamic should become more random as the fan is applied.
Double-clicking the [Fan] button will latch the encoder fan mode on (LED will flash). Double-click again to
turn the fan mode off.
Figure 7-2: Fan Button
Note: Dynamics stored in the palette will NOT retain Fanned Offset settings.
Step
7. Pile-on more canned dynamics by selecting more items in palette or stop
all
dynamics by pressing
Stop
All
button.
Step
8. To store a dynamic as a cue or preset, refer to
"Storing Dynamics in Cues/Presets"
Tip
1
2
4
3
5
8
6
7
9
10
11
12
14
13
15
18
16
17
19
20
Fan
Effect
Frame
Image
Slow
3D
Beam
Shift
Grid
Dynam
Color
Bank
Func
Fan Button
Fan Mode Button
Mode Options
Note: The V676 console is shown in this example, however,
this button is found on all Vx76 console front panels.