PRG Vx76 User Manual 3.6 - Manual (Page 273)

VX76 SOFTWARE USER MANUAL 257
Locating Stored Cues
In order to verify if a certain cue number exists or to locate nearest stored cue numbers, a shortcut can be used.
Locate cue number:
At keypad, press [Cue] [n] [Enter] for cue number you wish to verify. One of two things will happen:
+ If the cue exists, its number and label will be displayed in the command-line display.
+ If a cue by that number does not exist, "no cue" will be displayed. At command-line display, press Cue Forward or
Cue Backward arrows. The next higher or lower cue numbers (nearest the cue number you entered) will appear in
the display.
Freeze State Cues
A Freeze state may be stored as a cue.
+ At submaster touchscreen, press and hold Freeze while choosing a submaster. ("Choose" is activated by
touching the specific submaster on the touchscreen.)
Refer to "Freeze" on page 292 for more information.
Cue
Cue
Forward
Backward
Stack /
Separator
Selection