PRG Vx76 User Manual 3.6 User Manual
Page 28
12
VX76 SOFTWARE USER MANUAL
IMPORTANT NOTES REGARDING DIFFERENT TYPES OF VX76 CONSOLES
Special Features to Accommodate the V476 Front Panel
The V476 console provides the same programming
capacities and capabilities as the V676 console, however,
the desk is smaller and only one external monitor is
provided. Since the same Vx76 software application is
used on both consoles, special features were added with
Vx76 software version 2.5 to accommodate the
differences in hardware.
These special features are as follows:
+
Sliding Encoder Sidebar - The sliding Encoder
Sidebar is used with the six "soft" encoders available
on the V476 desk (Figure 1-2). The V676 has a
designated area for displaying encoder controls, but
since the V476 desk is smaller, these controls are
displayed using the sliding sidebar. The sidebar
appears in the same space as the central and palette
displays when an encoder is turned or an encoder
function button is pressed.
+
Palette Workspace Swapping - The palette
workspace swapping translates the three V676 palette
display spaces to the single V476 palette display.
(Since the three workspaces correspond to the three V676 palette displays, stored snapshots are interoperable
on both consoles.) Refer to
on page 13 for more information.
+
External Display Workspace Swapping - The external display workspace swapping translates the three V676
external display spaces to the single V476 external display. Refer to
on page 13 for more
information.
Figure 1-2: V476 Desk Layout
V476 Control Console
PALETTE
DISPLAY
CENTRAL
DISPLAY
SUBMASTER/UTILITY
DISPLAY
Soft
Encoders
Function
Buttons