PRG Vx76 User Manual 3.6 - Manual (Page 158)

142 VX76 SOFTWARE USER MANUAL
Labeling Cues
Each cue may be given a custom label. When labeling, the name can be entered on the console touchscreen
keyboard
or computer keyboard.
Store a basic cue with a label:
Step 1. Using manual controls, set luminaires in desired "stage look."
Step 2. Ensure that luminaires are in required intensity state (refer to "Intensity States" on page 140).
Step 3. Press [Store] [n] [Label] [Enter]

xxxxxx

enter/save

Change or add a cue label:
+ [n] [Label] [Enter]

xxxxxx

enter/save

.
or...
+ [Label] [Cue] [n] [Enter]

xxxxxx

enter/save

.
or...
+ [Label] [n] [Enter]

xxxxxx

enter/save

.
Label the current cue:
+ [Label] [Enter]

xxxxxx

enter/save

.
Soft Keyboard Copy/Paste
Buttons for Copy and Paste are available on the soft keyboard. These can be used to copy the entire label to the
clipboard or paste the clipboard to the label. The function also allows copy/paste from other sources.
Select multiple fields for copy by holding down the

shift

button. When multiple fields are pasted into a different label,
they will go into the same "slots" (fields) as they came from.
store cue 52
Store Cue 52 Label *