PRG Vx76 User Manual 3.6 - Manual (Page 150)

134 VX76 SOFTWARE USER MANUAL
Channels Tab
The Channels tab shows the current channels contained in the selected group. A "channel selector" at the top of the
window determines how - or if - channels get collected into the group. The channel selector options are as follows:
+ Stored - all selected channels will be collected into the group.
+ Rules - a set of one or more rules determines which channels are loaded into the group. Rules can be added
using the

New Rule

button or deleted using the

X

button. Rules can be additive

+

or subtractive

-

, "is" or
"is not," and can be applied to specific channels as determined by the Fixture Type selection. Additional
conditions can be added to a rule using the

&

button.
+ None - no channels are collected into the group. However, the group can still contain arrangement information to
modify a current channel selection. (This allows an "arrangement" to be pre-defined and then applied to a
selected group of channels at a later time. See
"Arrangement" on the following page.)
Channel Select Options Channels in Group
Tab
Channel Select Options Rules
New Rule Button
Channel Select Options