Toshiba LF600F - Manual (Page 81)

TOSHIBA i6,F,8,A0,8,6,9,
To change the span (range):
The following example shows how to change the span of Range 1 from 2.0 m/s to 100 1/min.
Key operation Display example Description
C2:
RANGE1
2.00000
m/s
Select "RANGEr in the configuration item selection
screen.
The currently set span value of Rangel (2.00000 in
this example) is displayed.
Then press the [ENT] key.
lEXTl [ENT]
STEP1
[ENT]
C2:
RANGE1
@.00000
m/s
The switch name display at the bottom changes
(three keys [UP], [SEL] and [SET]).
At the same time, the cursor appears.
(The digit on which the cursor is positioned is
reverse-displayed.)
[UP] [SEL] [SET]
STEP2
[SEL]
C2:
RANGE1
2.00000
Q/s
Move the cursor to the digit of the first unit using the
[SEL] key.
[UP] [SEL] [SET]
STEP3
[UP]
[SEL]
C2:
RANGE1
3.93000
l/s
Change the first unit to 1 using the [UP] key.
Next, move the cursor to the digit of the second unit
using the [SEL] key.
[UP] [SEL] iSET]
STEP4
[UP]
[SEL]
C2:
RANGE1
236.000
i/IBBil
Change the second unit to "min" using the [UP] key.
Next, move the cursor to the digit you want to
change, using the [SEL] key.
[UP] [SEL] [SET]
STEPS C2:
RANGE1
Change the numeric value using the [UP] key.
[UP]0[SEL]
036.OOO
l/min
Repeat this operation until the setting value
changes to the desired numeric value and press the
[SET] key.
fUPl fSELl [SET]
STEPS
[SET]
C2:
RANGE1
100.000
^ l/min
OK?
When you press the [SET] key, a message
confirming you whether the setting is OK is
displayed.
If OK, press the [SET] key. If you want to redo the
setting, press the [NO] key.
IN Ol [SET]
-
80
-