Toshiba LF600F - Manual (Page 61)

TOSHIBA ,6, F, 8, A 0,8,6,9,
Key operation Display example Description
STEP4 A3;
EX FREQ
[E
Hz
Repeat this operation to change the setting value to
12Hz.
[UP1/[DWN] When the value changes to the desired selection
item, press the [SET] key to set the item
temporarily.
[U P] [DWN] [SET]
STEPS
[SET]
A3:
EX FREQ
12
Hz
✓
OK?
[NO] [SET]
Pressing the [SET] key displays a message asking
you to confirm whether the setting is OK.
If OK, press the [SET] key. If you need to redo the
setting, press the [NO] key.
STEP6-1
[NO]
A3:
EX FREQ
Hz
Pressing the [No] key when you are asked "OK?"
causes the numeric value to return to the previous
value and enables you to redo the setting.
[U PI [SELl [SETl
STEP6-2(=END)
[SET]
A3;
EX FREQ
12
Hz
[EXT] [ENT]___________
Pressing the [SET] key when you are asked "OK?"
causes the setting value to be determined.
Then if you press the [EXT] key, you return to the
menu screen.
If you press the [ENT] key, you can restart
frequency value change operation from a state of
12Hz.
(Note 1) The exciting frequency is displayed cyclically, as shown below.
------------- ►bHz------------ ►12Hz------------ ►24Hz
-
60
-