Toshiba LF600F - Manual (Page 5)

TOSHIBA
6iF,8iA0i8i6,9i
SAFETY PRECAUTIONS (continued)
Safety Precautions for Installation and Wiring
A
CAUTION
■ Install a switch and fuse to isolate the
LF600F and LF602F from mains power.
Power supply from mains power
can cause electric shock or
PQ circuit break-down.
■ Use an appropriate device to carry and install
the LF600F and LF602F.
If this product falls to the ground,
^E^P injury, or malfunction of or damage
00 to the product, can be caused.
■ Turn off mains power before
conducting wiring work.
Wiring while power is applied
can cause electric shock.
DO
■ Do not modify or disassemble the LF600F and
LF602F unnecessarily.
Modifying or disassembling this
V IX/ product can cause
electric shock, malfunction of or
DON T damage to this product.
■ Turn off mains power before working on
pipes.
Working on pipes while power
^E^P is applied can cause
00 electric shock.
■ Ground the LF600F and LF602F independently
from power equipment.
(100 ohm or less ground resistance)
Operating this product
without grounding can cause
00 electric shock or malfunction.
■ Do not conduct wiring work with bare
hands.
Remaining electric charge
i even if power is turned off can
Vi—^ still cause electric shock.
DON’T
Use crimped terminal lugs for the terminal
board and GND terminal.
Loose connections can cause
^E^P electric shock, fire from
excessive current or system
malfunction.
■ Do not work on piping and wiring with wet
hands.
Wet hands may result in
1 electric shock.
DON’T
j. The label shown left is placed near the terminal board for
AV power supply on the converter.
/ H \ (A black border and symbol on yellow triangle)
Be alert to electric shock.
-
4
-