Toshiba LF600F User Manual
Toshiba
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
,6,F.8A0,8.6,9,
ELECTROMAGNETIC FLOWMETER
MODEL LF600F and LF602F
INSTRUCTION MANUAL
TOSHIBA CORPORATION
NOTES
Before using the equipment, please read this manual carefully and understand the con
tents, and then use the equipment correctly.
• NEVER attempt to operate the equipment in any ways that are not described in this
instruction manual.
• After reading this manual, store it with care in a place where it can be referred to
whenever needed.
• Please be sure that this manual is delivered to the personnel who will use this product.
This manual is related to the following products:
Table of contents
Document Outline
- ELECTROMAGNETIC FLOWMETER
- MODEL LF600F and LF602F
- INSTRUCTION MANUAL
- TOSHIBA
- NOTICE
- SAFETY PRECAUTIONS
- SAFETY PRECAUTIONS (continued)
- SAFETY PRECAUTIONS (continued)
- SAFETY PRECAUTIONS (continued)
- Handling Precautions
- Handling Precautions (continued)
- Table of Contents
- 1. Product Inspection and Storage
- 1.1 Product Inspection
- ■1 unit
- Electromagnetic flowmeter main unit
- Instruction manual One each for the converter and detector
- LF602F
- Electromagnetic flowmeter converter 1 unit
- Electromagnetic flowmeter detector 1 unit
- Instruction manual Once each for the converter and detector
- LF602F
- Electromagnetic flowmeter converter- instruction manual
- One unit
- One for the converter
- 1.2 Storage
- 1.1 Product Inspection
- Æ CAUTION
- 2. Overview
- 3. Names of Parts
- 4. Installation
- A WARNING
- 5. Wiring
- /h WARNING
- A CAUTION
- 6. Operation
- 7. LCD Display and Controls
- 7.1 Name and Function of Each Part of LCD Display
- Instructions
- 7.2 Display Format
- 7.3 Basic operations
- 7.5 Password input
- 8. Configuration Parameter Setting
- 8.1 Configuration items
- 8.2 Check/Change of Parameters
- TOSHIBA
- TOSHIBA
- 8.2.11 LCD Density Adjustment
- 8.2.12 Switch Position Setting
- 8.2.13 Span (range)
- 6 F8 AO 8 6:9
- Unit of span
- Hysteresis
- Setting sequence of the span(range)
- Checking each constant
- To change the range type:
- To change the span (range):
- Changing the hysteresis
- 8.2.14 Damping Constant
- 8.2.15 Low Cutoff
- 8.2.16 Current Output Setting Used When an Alarm Occurs
- 8.2.17 Display Low Cut Setting
- 8.2.18 Output Low Limit Setting
- TOSHIBA
- TOSHIBA
- 6F8A0869
- 6F8A0869
- 6|F|8iA0i8,6i9i
- Changing the high, low, high-high, or low-low limit alarm value
- 8.2.25 Empty Alarm Setting
- 8.2.26 Self-diagnosis ON/OFF Setting
- 8.2.27 Alarm Output Preset Function Setting
- 8.2.28 Rate-Of'Change Limit and Control Limit Time
- 8.2.29 Fixed-Value Output
- 8.2.30 Zero Offset Adjustment
- 8.2.31 Parameter initial settings list
- 9. Calibration
- 10. Digital I/O Functions
- 10.1 Digital I/O Specifications
- 10.2 Totalizer and Pulse Output
- 10.3 Multi-range Functions
- 10.4 High/Low, High-high or Low-low Limit Alarm
- 10.5 Preset Count Output
- 10.6 Remote Zero Adjustment
- 10.7 Remote Selection of Fixed Value Output
- 10.8 Converter Failure Alarm
- 10.9 Multiple range high/low limit alarm function (option)
- 11. Communications Function
- 12. Self-Diagnostics and Alarms
- 13. Maintenance and Troubleshooting
- A WARNING
- 14. Principle of Operation
- 15. Specifications
- 16. Outline Drawing
- 1. Product Inspection and Storage