Specifications, 1 specifications, General specifications – Toshiba LF600F User Manual
Page 151: Flow rate to the range (%), Accuracy, Less than 0.3 m/s 0.3 — less than 1.0 m/s, 25 %fs, 5% of rate, 010 m/s, Input
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6, F,8,A 0,8,69,
15. Specifications
15.1 Specifications
■ General Specifications
Measuring range: (measuring range by flow rate conversion)
0-0.3m/s to O-lOm/s
(A range of O-O.lm/s to 0-0.3m/s can be dealt with by an option specified at order time.)
Accuracy: (Accuracy when combined with the detector)
Flow rate to the
range (%)
20%
20
-
100
%
0 - 50%
50 -100%
Accuracy
0.1
less than 0.3 m/s 0.3 — less than 1.0 m/s
±0.25 %FS
±0.5% of rate
±0.25 %FS
±0.5% of rate
1.010 m/s
±0.1 %FS
±0.5% of rate
(Note) Accuracy under the basic operation conditions with Toshiba calibration facility)
Conductivity
: 5
¡
jl
S/cm or more
Ambient temperature:
-20
to +60°C
Storage temperature : -25 to +65°C
Power supply : 100 to 240Vac (allowable voltage range: 80 to 250Vac 50/60Hz)
24Vdc
(allowable voltage range: 18 to 36Vdc) or
1 lOVdc (allowable voltage range:90 to 130Vdc)
Power consumption : 27VA (17W) or less
Input
Input signal: • Flow rate proportional signal from the detector
• Digital input signal (option)
Signal type:
20 to 30Vdc voltage signal
Input resistance:
About 2.7k Q
Number of input points:
1
Digital input function (option): Select either of the following.
•
Range switching input: Large/Small range switching of unidirectional double range,
forward/reverse direction double range
•
Counter control input: Internal totalization counter start/stop/reset control
• Output hold input: The current output and pulse output are kept to their preset
values.
• Zero adjustment input: Start still water zero adjustment.
-
150
-