Toshiba – Toshiba LF600F User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA
6,F,8,A0,8,6,9,
Shown below is an example of changing the custom unit from AAA/BBB to XXX/ZZZ.
Key operation
Display example
Description
B:
Select "CUSTOM UNIT" in the configuration item
MEAS MODE
MAIN DSP
SUB DSP
CUSTOM DATA
^CUSTOM UNIT
LCD ADJUST
SW POSITION
fSELl lENTl
selection screen.
STEP1
B4:
The currently set custom unit (AAA/BBB in this
CUSTOM UNIT
AAA/BBB
example) is displayed.
[ENT]
Then press the [ENT] key.
[EXT] [ENT]
* Pressing the [EXT] key returns you to the menu
screen.
STEP2
B4:
The switch name display at the bottom changes.
CUSTOM UNIT
(three keys [UP], [DOWN] and [SET])
0AA/BBB
At the same time, the cursor appears.
[ENT]
[UP] [DWN] [SET]
(The digit in the place the cursor position is
currently positioned is reverse-displayed.)
STEP3
B4:
CUSTOM UNIT
0AA/BBB
Using the [UP]/[DWN] key, change the character.
[UP]/[DWN]
When the desired character is displayed, press the
[SET]
fUPl [DWNl fSETl
[SET] key. The cursor moves to the next character.
STEP4
B4:
Repeat this operation to select all characters to the
[UP]/[DWN]
CUSTOM UNIT
xxx
/
yy
B
7th character.
[SET]
fUPl [DWN] [SET!
STEPS
B4:
Pressing the [SET] key when the cursor is
CUSTOM UNIT
positioned on the 7th character causes the selected
XXX/YYY
unit characters to be set temporarily. And a
[SET]
message to confirm whether the setting is OK is
displayed.
[NO] [SET]
If OK, press the [SET] key. If you want to redo the
setting, press the [NO] key.
STEP6-1
B4:
Pressing the [NO] key when you are asked "OK?"
CUSTOM UNIT
causes the custom unit to return to the previous
[NO]
0AA/BBB
[UP] [DWN] [SET]
state and enables you to redo the setting.
STEP6-2(=END)
B4:
Pressing the [SET] key when you are asked "OK?"
CUSTOM UNIT
causes the setting value to be determined.
XXX/YYY
Then if you press the [EXT] key, you will return to
[SET]
the menu screen.
If you press the [ENT] key, you can restart custom
fEXTl [ENTl
unit change operation from a state of XXX/YYY.
(Note 1) The selectable characters are displayed cyclically as shown below.
-------- ^ alphabetical character (lowercase)---------- ^ Alphabetical character (uppercase)
---------- Symbol ^ _____________________________ Numeric character
-
71
-