Toshiba LF434 User Manual
Toshiba
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- IvxplaDation of signal words
- Safety Precautions for Installation and Wiring
- Safety Precautions for Maintenance and Inspection
- Disclaimer
- Handling Precautions
- Handling Precautions (continued)
- Table of Contents
- 1, Product Inspection and Storage
- 2. Overview
- 3. Names of Parts
- IMPORTANT
- 4. Installation Safety Precautions for Installation
- K'5-5!
- 5. Wiring
- A WARNING
- DONT
- TOSHIBA
- 5Л Cables
- 5.2 External Device Connections and Grounding
- IMPORTANT
- 53 Digital I/O ConnecUons
- SA Wiring Procedure
- IMPORTANT
- 6, Operation
- n Do not touch the LF434/LF404 maio body when high temperature fluid h being measured«
- DON’T
- 7. LCD Display and Controls (option)
- 7,1 Outline
- 7 J Basic operations
- Change mode flow
- Figure 7.2 LF4D4 Converter for special specifications
- lA Configuration Items Selection Table
- 7*5 Password input
- 8.2 Checking or Changing Paramctm
- 8.2.1 Excktalion Current
- To change the excitatLon frequency:
- S.2.4 Indicating Unit
- Notes
- 8,2,5 Span (range)
- To change the hysteresis:
- Dampin}; Constant
- 8.2.9 Digital I/O
- 8.2,1Э Counting Rate (pulse rate)
- TOSHIBA
- 8.2»11 Preset Count Value
- NOTE
- S.2.12 High andlx)w Limit Alarms
- 8.2.13 Empty Pipe Alarm
- Ti> chan{;e the emptv pipe ^larm enable/disable status iNormal Converter);
- Key operation
- Dis play example
- Jl: EMPTY ALM ON
- Jl: EMPTY ALH OFF
- Jl : EMPTY ALH
- S2A4 Rate*Of-Change Limit
- * Rate-of-chtmge limit
- NOTE
- 8.2.15 Fixed-Value Output
- ■ To change the enable/d[sable status of the tlxcd-value output and its output values:
- CURR,
- TOSHIBA
- 8,2.18 4-20mA AJarni Output
- S,2.t9 DJ detective Level
- 8.2,20 Preset Function
- I To change the preset functions:
- 9. Calibration
- 9<1 Cnlibration Items
- IMPORTANT
- 10. Digital I/O Functions
- Counting Rate and Pulse Width Settings
- DO runction setting
- Indicating Unit Setting
- Measurement Mode
- Totalizer Operation ■ Usm^ control keys on the panel (option)
- NOTES
- 10,3 Multi-range Functions
- DO/DJ function setting
- ■ Output performance of niultì-runge funcCton:;
- (1) Automatic ^selecMoti of unidirectional flow multi-range
- (2) Aulomatic selection of bidirectional flows multi-riinge
- Reverse to Forward direction change ■ Forward to Reverse direction change
- P) j^election of unidirectional tlows ninUi-range >vith un external signal
- (4) RemoÉe selection of bidirectional flows multi-range with an external signal
- Reverse to Forward direction change ■ forward to Reverse direction change
- 10»4 High and lAtw Limit AJarnu
- 10»5 Empty Pipe Alarm
- 10«7 Remote Zero Adjustment
- 10.8 Remote Selection of Fixed Value Output
- 11. Communications Function
- 12. Self-Diagnostics and Alarms
- 13. Maintenance and Troubleshooting
- Safety precaution for Maintenance and Troubleshooting
- A WARNING