Toshiba LF600F - Manual (Page 65)

TOSHIBA ,6,F,8,A0,8,6,9,
• To change the password:
The following example shows how to change the password from 123 to 453.
Key operation Display example Description
A5: Select "PASSWORD" in the configuration item selection
PASSWORD screen.
123
The currently set password (123 in this example) is
displayed.
fEXTl fENTl
Then press the [ENT] key.
STEP1 A5: The switch name display at the bottom changes (three
PASSWORD keys [UP], [SEL] and [SET])
[|23
At the same time, the cursor appears.
[ЕМЛ (The digit on which the cursor is positioned is
[U P] [SEL] [SET]
reverse-displayed.)
STEP2 A5: Use the [SEL] key to move the cursor to the desired digit
PASSWORD and press the [UP] key to change the numeric value.
[SEL]<^[UP]
45§
Repeat this operation to change the setting value to 453.
When the desired value is displayed, press the [SET] key
[U PI [SEL] [SET]
to set the numeric value temporarily.
STEP3 A5: Pressing the [SET] key displays a message asking you to
PASSWORD confirm whether the setting is OK.
453
If OK, press the [SET] key. If you need to redo the setting.
[SET]
OK?
[NO] [SET]
press the [NO] key.
STEP4-1 A5: Pressing the [No] key when you are asked "OK?" causes
PASSWORD the numeric value to return to the previous value and
[NO]
[|23
[U PI [SEL] [SET]
enables you to redo the setting.
STEP4-2(=END) A5: Pressing the [SET] key when you are asked "OK?" causes
PASSWORD the setting value to be determined.
453
Then if you press the [EXT] key, you return to the menu
[SET] screen.
If you press the [ENT] key, you can restart password
[EXTl [ENTl
change operation from a state of 453.
(Note 1) If you set 000 for the password, it is considered as that the password is not used. In this
case, the password input confirmation screen is not displayed when you move from the
measurement mode to the setting mode and all parameter setting items and restrictions on the
calibration screen are released.
(Note 2) If you set your password, manage it not to forget it.
The password should be managed based on the management standard of the system you use.
-
64
-