Toshiba LF600F - Manual (Page 56)

TOSHIBA 6iFi8iA0i8|6|9,
8.2.2 Exciting Current Vaiue
The exciting current value can be checked/changed by the following procedures.
Be sure to match the exciting current value with the value specified for the
combined detector.
Specifying any other value may cause an error.
Shown below is an example of changing the exciting current value from 0.1900A to 0.2150A.
Key operation Display example Description
A: In the configuration items selection screen, select
MEAS MODE
^EX CURRENT
METER SIZE
EX FREQ
FLOW DIRECTN
PASSWORD
ADDR SET
[SEL] [ENT]
"EX CURRENT."
STEP1 A1; The currently set exciting current value (in this
EX CURRENT
0.20000
example 0.1900A) is displayed.
[ENT]
A
Then press the [ENT] key.
* Pressing the [EXT] key returns you to the menu
[EXT] [ENT]
screen.
STEP2 A1: The switch name display at the bottom changes.
EX CURRENT
.|1900
(three keys [UP], [SEL] and [SET])
At the same time, the cursor appears.
[ENT]
A
(The digit in the place the cursor position is
currently positioned is reverse-displayed.)
fU P] [SEL] [SET!
Then press the [SEL] key.
STEPS A1: You can continue to change the setting value.
EX CURRENT Press the [SEL] key to move the cursor to the digit
O.09OO
you want to change.
[SEL]
A
fU PI [SEL] fSETl
Then press the [UP] key.
STEP4 A1:
EX CURRENT
You can continue to change the setting value.
0.@900
Pressing the [UP] key increments the digit in the
[UP]
A
fU P] [SELl [SET!
place the cursor is currently positioned. (Holding
down this key causes this increment operation to be
continued).
-
55
-