Toshiba LF600F - Manual (Page 36)

TOSHIBA i6|F,8iA0i8i6i9
LCD display
An 8-line X 14-character liquid crystal display. The backlit display enables an easy-to-read
indication even under poor lighting conditions. Instantaneous flow rates or totalized flow in the
measurement mode, or configuration parameters in the setting mode can be displayed. (Number of
LCD display dots: 128 x 128 dots)
FLOlil
0 0 1 0 . 0 0
TOTAL FLOW
00099.99
FOR CNT m3
0 )
0 Control key indicator
Indicates the function (on the current screen) of the key switches around the LCD. This
indicator is usually turned off It turns on when you hold down any of the three control keys
for 3 seconds or longer.
(D Measured value main display
Displays a measured value of the type the operator has selected. In the main display, a
numeric value is displayed in large size.
(3) Measured vale sub display
Displays a measured value/setting value of the type the operator has selected. Or displays an
error message. When an error message is displayed, no measured value/setting value is
displayed (error message-precedence display).
# Setting switch
The control keys allow you to perform converter control and setting, without opening the
converter housing.
These three controls keys function differently depending on the current display screen.
The functions of these control keys are displayed on the display screen.
In this product, the display method can be changed according to the converter installation
direction. For example, if the control keys are installed so that they are located above the display,
they can be displayed appropriately as shown below, by changing the display method.
eiD
FLOU
0010.00
m/s
TOTAL FL0W
00099.99
FOR CNT Hl3
FLOW
0010.00
fil/S
TOTAL FLOW
00099.99
FOR CNT n3
FLOW
0010.00
m/s
TOTAL FLOW
00099.99
FOR CNT m3
Above the control keys Left of the control keys Right of the control keys
-
35
-