Cub Cadet 6 x 4 Big Country - Manual (Page 51)

Section 3: Drive Axle Service
3 - 8
7.4. Push the upper tensioner roller down to relieve
tension from the chain and lock it in position
using a 1/4” steel dowel pin. See Figure 7.4.
NOTE: Both tensioners can be locked in this
fashion for chain removal.
7.5. If working on the right side of the Big Country,
loosen the hose clamps and remove both hoses
from the air filter using a screwdriver or a 5/16”
driver. See Figure 7.5.
NOTE: If working on the left side of the Big
Country, the muffler may be left in place.
7.6. Cover the carburetor to prevent foreign objects
from entering the engine.
7.7. Unbolt the air filter bracket from the air intake
shoulder using a 13mm wrench, and remove the
air filter. See Figure 7.7.
7.8. Remove the bolt from the delrin roller from the
tensioner using a 3/4” socket wrench.
See Figure 7.8.
Figure 7.4
Upper Chain Tensioner
Roller
Lower Chain Tensioner
Locking Pin
Figure 7.5
Air Filter
Hose Clamps
Hose From Plenum
To Air Filter
Ho se To C arburetor.
Bolts
Figure 7.7
Air Filter Bracket Air Intake
Shoulder
Figure 7.8
Bolt
(Recessed in Roller)