Cub Cadet 6 x 4 Big Country - Manual (Page 11)

Section 2: Clutch, Transmission, Brakes, Linkages
2 - 2
2.8. Inspect the shift interlock mechanism. If the
interlock mechanism does not work properly,
refer to the “Shift Interlock and Clutch Pulley
Brake Adjustment” section of this manual.
See Figure 2.8.
2.9. Remove the hairpin clip and flat washer that
secure the shift rod to the shift lever and discon-
nect the shift rod by pulling it out of the hole in
the lever. See Figure 2.9.
2.10. To Remove the shift rod, remove the hairpin
clip and clevis pin that connect it to the transmis-
sion shift arm. See Figure 2.10.
2.11. To remove the shift lever, remove the red knob
from the end of the shift lever.
NOTE: The knob and lever are threaded.
2.12. Remove the bolt that holds the pivot pin to the
frame. See Figure 2.12.
Figure 2.8
I
Interlock
Arm
Figure 2.9
Hairpin Clip
Shift Rod
Shift Lever
Transmission Lever
Clevis Pin
Hairpin Clip
Shift Rod
Figure 2.10
Pivot Pin
Shift Lever
Shift Rod
End of
Figure 2.12