Cub Cadet 6 x 4 Big Country - Manual (Page 14)

Section 2: Clutch, Transmission, Brakes, Linkages
2- 5
2
5.4. Pivot the cable in the differential lock arm so that
the cable aligns with the slot in the arm. This will
allow the barrel at the end of the cable to be
remove from the arm. See Figure 5.4.
5.5. Trace the cable forward to the bracket on the
frame. See Figure 5.5.
5.6. Loosen the jam nuts that hold the cable in the
bracket.
5.7. Slip the cable out of the bracket.
Figure 5.4
Slot
Differential Lock Arm
Figure 5.5
Differential Lock Cable
Front Bracket
Jam Nuts
5.8. Unhook the spring at the end of the cable from
the differential lock lever. See Figure 5.8.
5.9. To remove the differential lock lever, first
remove the cable.
5.10. Release the return spring that runs between the
differential lock lever and the frame.
See Figure 5.10.
NOTE: This spring is most easily reached from
beneath the driver’s seat.
5.11. Remove the black knob from the end of the dif-
ferential lock lever. It is threaded onto the lever.
5.12. Remove the bolt that holds the pivot pin into the
frame using a ½” wrench.
Figure 5.8
Differential Lock Lever
Differential Lock Cable
Figure 5.10
Return Spring
Differential Lock Lever