Bio-Rad BioLogic Signal Import Module (SIM) - Manual (Page 47)

Figure 2-18. Two Configurations of the SVT3-2 Valve
When used as a diverter valve with a Model 2110 or generic fraction collector, this valve should be named
as such from the Setup screen. Position 1 of this valve is Waste; position 2, Collect.
CONDUCTIVITY
FLOW CELL
COLLECT TO MODEL 2110
OR GENERIC FRACTION COLLECTOR
WASTE
SAMPLE SELECT
VALVE
WATER RINSE
VALVE
DIVERTER
VALVE
A B
WORKSTATION
SAMPLE
A
WATER
RINSE
B
UV MONITOR
DESCRIPTION OF SYSTEM COMPONENTS SYSTEM OVERVIEW
2-34