Lenze PC-based Automation Industrial PC - Manual (Page 98)

Industrial PC | Parameter setting & configuration
Remote maintenance and diagnostics
logbook function
98
L
2.5 EN - 01/2012

Tip!
The display of the logbook entries can be filtered according to the period,
application, severity, and area.
Further information on the use of the logbook function in the »WebConfig« can be found
in the following section: Logbook
( 53)
12.5.1.1 logbook codes
The logbook settings can be called in the »WebConfig« via the Diagnostics button.
More information on the parameters of the logbook (from code C0048) can be found in the
following sequence: Parameters of standard devices
( 129)
12.5.2 Logbook query in the »Engineer«
In the »Engineer« the logbook entries can be queried. The »Engineer« accesses the logbook
via the data manager of the IPC.