Lenze PC-based Automation Industrial PC - Manual (Page 198)

Industrial PC | Parameter setting & configuration
Parameter reference
Industrial PC extension modules
198
L
2.5 EN - 01/2012
C1596/2
C1596/3
C1596/4
C1596/5
C1596/6
C1596/7
C1596/8
Parameter | Name:
C1596/2 | ECAT: Slave manufacturer ID
Data type: UNSIGNED_32
Index: 22979.2
d
=
0x59C3.0x02
h
Identification number of the slave manufacturer (e.g. 0x0000003B for Lenze)
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1596/3 | ECAT: Product code
Data type: UNSIGNED_32
Index: 22979.3
d
=
0x59C3.0x03
h
Product code of the slave
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1596/4 | ECAT: Revision number
Data type: UNSIGNED_32
Index: 22979.4
d
=
0x59C3.0x04
h
Revision number of the slave
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1596/5 | ECAT: Serial number
Data type: UNSIGNED_32
Index: 22979.5
d
=
0x59C3.0x05
h
Serial number of the slave
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1596/6 | ECAT: Slave device name
Data type: VISIBLE_STRING
Index: 22979.6
d
=
0x59C3.0x06
h
Device name of the slave
The name is saved to the master configuration file.
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1596/7 | ECAT: Auto increment address
Data type: INTEGER_32
Index: 22979.7
d
=
0x59C3.0x07
h
The auto increment address is defined by the position of the slaves. The first node is assigned address "0". The
addresses are assigned consistently in descending order: 0, -1, -2 ...
Display range
(min. value | unit | max. value)
-65536 0
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1596/8 | ECAT: Physical address
Data type: UNSIGNED_16
Index: 22979.8
d
=
0x59C3.0x08
h
Physical address of the slave
The addresses are assigned consistently in ascending order, starting with 1001.
Display range
(min. value | unit | max. value)
0 65536
; Read access Write access CINH PLC STOP No transfer