Lenze PC-based Automation Industrial PC - Manual (Page 37)

2.5 EN - 01/2012
L
37
Industrial PC | Parameter setting & configuration
System structure
Industrial PC
5.2.1 Centralised control system
 The PLC of the Industrial PC (Logic/Motion) is the central control component, consisting
of the PLC runtime program with the running PLC application.
– Via the data manager and the fieldbus driver the PLC (Logic/Motion) has access to
the system components and field devices.
[5-1] * The PROFIBUS fieldbus driver can only be accessed via PLC (Logic/Motion). Access via Engineer, GDC or VisiWinNET®
Runtime is not provided.
 Field devices and the Industrial PC compose the machine to be commissioned by the
Engineering PC.
 The Industrial PC can read parameters from and write parameters to the connected
field devices via the fieldbus (Logic/Motion).
5.2.2 IPC data manager
With the Data manager, Lenze Industrial PCs contain a central tool for the configuration
and data management of a system.
 A system in this connection is the combination of an Industrial PC and the field devices
connected to it and registered via the fieldbus.