Lenze PC-based Automation Industrial PC - Manual (Page 190)

Industrial PC | Parameter setting & configuration
Parameter reference
Industrial PC extension modules
190
L
2.5 EN - 01/2012
C1534
C1535
C1536
C1537
C1538
Interface parameters of the card in slot 2
C1574
C1580/1
C1580/2
Parameter | Name:
C1534 | Device: Software version
Data type: VISIBLE_STRING
Index: 23041
d
= 5A01
h
Software version of the card
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1535 | Device: Hardware version
Data type: VISIBLE_STRING
Index: 23040
d
= 5A00
h
Hardware version of the card
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1536 | Device: Serial number
Data type: VISIBLE_STRING
Index: 23039
d
= 59FF
h
Serial number of the card
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1537 | Device: Manufacturer
Data type: VISIBLE_STRING
Index: 23038
d
= 59FE
h
Manufacturer of the card
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1538 | Device: Manufacturing date
Data type: VISIBLE_STRING
Index: 23037
d
= 59FD
h
Manufacturing date of the card
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1574 | ECAT: MAC address
Data type: VISIBLE_STRING
Index: 23001
d
= 59D9
h
MAC address of the interface
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1580/1 | ECAT master config.: Date
Data type: DATE
Index: 22995.1
d
=
0x59D3.0x01
h
Date of the master configuration file in the file system of the IPC
The data manager refers to the ...\storage\IPC\PLC directory for the date of the master configuration file. If this file
is not available, the date will be displayed as "01.01.1900".
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1580/2 | ECAT master config.: Checksum
Data type: UNSIGNED_32
Index: 22995.2
d
=
0x59D3.0x02
h
Checksum of the master configuration file in the file system of the IPC
The data manager refers to the master configuration file in the ...\storage\IPC\PLC directory for the checksum. If this
file is not available, the value will be displayed as "0x00000000".
; Read access Write access CINH PLC STOP No transfer