Lenze PC-based Automation Industrial PC - Manual (Page 89)

2.5 EN - 01/2012
L
89
Industrial PC | Parameter setting & configuration
Remote maintenance and diagnostics
FTP connection
12.3.2 FTP settings in the »Engineer«
Via the »Engineer« the settings for the FTP connection can be managed. With codes 171 to
174 you can activate the FTP access for the IPC and define user rights. For changing the FTP
settings select All parametersFTP.
 Code 171 activates authentication of the FTP user,
 Code 172 enables log-on of the anonymous FTP user "Anonymous",
 Code 173 activates the upload of files by an anonymous FTP user,
 Code 174 activates the FTP service.
FTP user authorisations
In the FTP: Authorisations of user n dialog window you define
– The Windows® CE users who may use the FTP access.
– The authorisations of Windows® CE users. The authorisations are required to be
connected to the Industrial PC via FTP.
The allocation of rights can be changed via check boxes. To activate a right, the respective
box must be marked with a check mark ;. These rights can be allocated:
– Allow Read,
– Allow Write,
– "Allow Virtual Roots" as the virtual root directories of the FTP connection,
– Allow Hidden Files.

Note!
For accepting the FTP settings, restart the FTP server. The Stop FTP server
command under code 18 deactivates the FTP server, Start FTP server activates
the FTP server.