Lenze PC-based Automation Industrial PC - Manual (Page 126)

Industrial PC | Parameter setting & configuration
Parameter reference
Structure of the parameter description
126
L
2.5 EN - 01/2012
Table footer
The table footer contains the
Parameter attributes .
14.1.1 Data types
The following data types are available for parameters:
14.1.2 Parameters with read access
Parameters not having the "write access" attribute can only be read. The user cannot
change these parameters.
Description structure
14.1.3 Parameters with write access
Parameters with a checkmark (;) in front of the "write access" attribute can be changed
by the user. The Lenze setting for these parameters is printed in bold.
 The user can change these settings
– via a selection list or
– by directly entering a value.
Data type Meaning
INTEGER_8 8-bit value with sign
INTEGER_16 16-bit value with sign
INTEGER_32 32-bit value with sign
INTEGER_64 64-bit value with sign
UNSIGNED_8 8-bit value without sign
UNSIGNED_16 16-bit value without sign
UNSIGNED_32 32-bit value without sign
UNSIGNED_64 64-bit value without sign
FLOAT_32 32-bit floating point number
FLOAT_64 64-bit floating point number
VISIBLE_STRING String of characters from printable characters
OCTET_STRING String of characters from any characters
BITFIELD_8 8-bit value bit coded
BITFIELD_16 16-bit value bit coded
BITFIELD_32 32-bit value bit coded
DATE Date
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Display range
(min. value | unit | max. value)
; Read access Write access CINH PLC STOP No transfer