Lenze PC-based Automation Industrial PC - Manual (Page 115)

2.5 EN - 01/2012
L
115
Industrial PC | Parameter setting & configuration
Visualisation with »VisiWinNET®«
Constellation and connection
13.3.4.3 Local use of CAN OPC tunnel

How to access the variables of the CAN OPC tunnel:
Place the prefix CAN in front of the variable. Specify the variable in the following
form:
.can
.dev.pari<24575 minus
code>d
Example: CAN.can1.dev40.pari24572d8
13.3.4.4 Using the Remote SoftPLC OPC tunnel

How to access the variables of the Remote SoftPLC OPC tunnel:
1. Place the ID of the Remote IPC RemoteIPC and the prefix PLC.PLC: in front of the
variables,
2. Specify the variable in the form ..
Example: RemoteIPC.PLC.PLC:.EPMAP
13.3.4.5 Using the Remote data manager OPC tunnel

How to access the variables of the Remote data manager OPC tunnel:
1. Place the ID of the Remote IPC RemoteIPC and the prefix DM in front of the
variables,
2. Enter the variable in the form of .pari<24575 minus code>d.
Example: RemoteIPC.DM.pari24572d8
13.3.4.6 Local use of Remote CAN OPC tunnel

How to access the variables of the Remote CAN OPC tunnel:
1. Place the ID of the Remote IPC RemoteIPC and the prefix CAN in front of the
variables,
2. Enter the variable in the form of .can.dev
device>.pari<24575
minus code>d.
Example: RemoteIPC.CAN.can1.dev40.pari24572d8