Lenze PC-based Automation Industrial PC - Manual (Page 9)

2.5 EN - 01/2012
L
9
Industrial PC | Parameter setting & configuration
About this documentation
1 About this documentation
This documentation provides general information on the parameterisation and
configuration of an Industrial PC. The Industrial PC is the central control system of the PC-
based Automation system.
The present manual is part of the "PC-based automation" manual collection which consists
of the following components:
Documentation Subject
System manuals
PC-based Automation
• Control technology - system structure & configuration
• Visualisation - system structure & components
Communication manuals
PC-based Automation
• CANopen control technology
• EtherCAT control technology
• PROFIBUS control technology
(Software) manual
PC-based Automation
• Industrial PC - Parameterisation & Configuration
Operating Instructions
Embedded Line Panel PC
• EL x800 - Panel PC with TFT display
Operating Instructions
Command Station
• CS x800 - Stand-alone operator terminal
Operating Instructions
Control Cabinet PC
• CPC 2800 - Control cabinet PC
Operating Instructions
HMI EL 100
• EL 1xx - HMI with Windows
®
CE
Further software manuals • Global Drive Control (GDC)
• IPC as gateway - Parameterisation & Configuration
• »Engineer«
• »PLC Designer« / »PLC Designer - SoftMotion« / »PLC Designer - CANopen
for runtime systems«
• »VisiWinNET® Smart«

Information on the use of the IPCs beyond control technology can be found in the
System manuals which are designed to meet the respective case of application.