Lenze PC-based Automation Industrial PC - Manual (Page 58)

Industrial PC | Parameter setting & configuration
Web-based parameterisation with »WebConfig«
User interface
58
L
2.5 EN - 01/2012
7.4.7.3 PROFIBUS master communication card (MC-PBM)
7.4.7.4 Ethernet communication card (MC-ETH)
7.4.8 Polling
In this menu the polling of the screen is activated.
7.4.9 Language selection
 In the Language section you can define the desired language settings from the
selection list.
 The language settings take immediate effect, the »WebConfig« does not need to be
restarted.
7.4.10 Parameter list buttons
Button Function
Display the parameters of the PROFIBUS master card.
• This user interface displays the parameters of the MC-PBM
communication card.
• The parameters of the communication card are listed in the following
section in numerically ascending order:
PROFIBUS master communication card (MC-PBM) ( 207)
Button Function
Display the parameters of the Ethernet communication card.
• The parameters of the communication card are listed in the following
section in numerically ascending order:
Ethernet communication card (MC-ETH) ( 209)
Display the address parameters of the Ethernet communication card.
Interval:
Setting the interval for the polling in seconds.
• Example value: 5.
Active:
Click the control field to activate the polling.
Button Function
Accept Accept data.
• After a system restart changed data are lost, as they are not persisted
automatically.
Accept & Save all Accept and save all changed data.
• The data will remain on your PC after a system restart.
Update Reload data and update screen display