Lenze PC-based Automation Industrial PC - Manual (Page 25)

2.5 EN - 01/2012
L
25
Industrial PC | Parameter setting & configuration
Commissioning
Control elements
Control panel
Function key "F2"
Standard mode: The key sends the key code for +
The standard assignment of the function key is the right mouse-click.
Service mode: The screen brightness is increased.
Function key "F3"
Standard mode: The key sends the key code for +
Service mode: The screen brightness is reduced.
The codes C422
( C0422 )
and C423
( C0423 )
contain the parameters for screen brightness.
Further information on the codes containing the values of the screen brightness can be
found in chapter Parameters of standard devices
( 129)
Shift key ""
Standard mode: The key sends the key code for +.
The shift key activates the Service mode. When the system is started, the shift key
interrupts batch processing and executes the
Windows® CE control panel.
Icon Designation Information
Network Connections Open configuration of the network connections
Service Command Open command line box
System Show system properties
Touch Calibration Touch display calibration ( 31)
»VisiWinNET®« Project Manager Start »VisiWinNET®« Project Manager
• Manage »VisiWinNET®« projects
»VisiWinNET®« Remote Access Start »VisiWinNET®« Remote Access
Transferring an application to the target device ( 116)
VisualStudio Connect VisualStudio2005 ConManClient
»WebConfig« Start »WebConfig«