Or winembeddedxp computer, External visu on a windows, Xp/xp embedded ipc (remote access) – Lenze PC-based Automation Industrial PC User Manual

Page 122

Industrial PC | Parameter setting & configuration

Visualisation with »VisiWinNET®«

Configuration of the OPC tunnel

122

2.5 EN - 01/2012

13.4.3

External visu on a Windows XP/XP Embedded IPC (remote access)



The »VisiWinNET®« application of the external Windows XP/XP Embedded IPC

accesses the OPC server of the control IPC (controller) (via OPC tunnel 1). In the

example, the IP address of the IPC (controller) is: 192.168.5.99



For configuring OPC tunnel 1, use the oct.xml configuration file in the
\Programs\Lenze\Lenze Digitec OPC Tunnel

directory. Enter the

corresponding IP address of the control IPC in the configuration file (as described in the

following section).



For configuring OPC tunnel 2, use the oct.xml configuration file. The standard

settings need not be changed.



Note!

For using an external Visu on a Windows XP/XP Embedded IPC, the oct.xml

configuration file on the Windows XP IPC must be adapted.