13 visualisation with »visiwinnet, 1 introduction to »visiwinnet, 1 »visiwinnet®« compact – Lenze PC-based Automation Industrial PC User Manual
Page 103

2.5 EN - 01/2012
L
103
Industrial PC | Parameter setting & configuration
Visualisation with »VisiWinNET®«
Introduction to »VisiWinNET®«
13
Visualisation with »VisiWinNET®«
This chapter provides information on the »VisiWinNET®« software. Apart from some
general information, it basically gives an overview of how the software is connected to
Lenze's control technology.
13.1
Introduction to »VisiWinNET®«
»VisiWinNET®«
is a visualisation platform for mechanical and systems engineering.
It can be used to create complex visualisation applications, the possibilities range from
classical operate and monitor functions through to sophisticated SCADA systems.
»VisiWinNET®« consists of a developer software and a runtime component.
The developer software is used to create visualisation applications on the Engineering
PC which are run using the runtime component on the IPC.
In order to transfer the visualisation applications created by means of the Engineering
PC to the Industrial PC, the »VisiWinNET®« Remote Access Manager software is used.
TCP/IP is used as a transmission standard.
13.1.1
»VisiWinNET®« Compact
»VisiWinNET®« Compact is a runtime version of »VisiWinNET®« especially designed for use
on computer systems. »VisiWinNET®« Compact requires very little memory capacity and
processor power. A version for the Windows® CE operating system and a version for
Windows® XP embedded are available. Detailed information on the installation and use of
»VisiWinNET®« COMPACT can be found in the manufacturer's original documentation.
Further information on the operation of »VisiWinNET®« can be found in the
software documentation of »VisiWinNET®«.