Lenze PC-based Automation Industrial PC - Manual (Page 22)

Industrial PC | Parameter setting & configuration
Commissioning
Control elements
22
L
2.5 EN - 01/2012
4.1.3 Baseboard label
The baseboard label illustrates possible connections to the main board of the IPC.
 Therefore, quick wiring of the individual components is possible.
4.2 Control elements
Depending on the equipment level and the model series, the different series are provided
with different control elements. The monitor panels and embedded line front modules are
equipped with status LEDs, function keys and special keys.
The IPC can be operated
 as standard via the function keys of the command stations and embedded line PCs next
to the panel,
 or via the on-screen keyboard or touchscreen.
 If extensive diagnostics and configurations are required, the Industrial PC can also be
operated via external input devices such as a keyboard or mouse.
4.2.1 LEDs at the front of the monitor panel
The LEDs are located at the front of the panel. Depending on the model design, the LEDs are
positioned in different places.
Power LED
 The green power LED is lit when an input voltage is supplied.
 If the LED is blinking, the Industrial PC is in service mode.
Fail LED
 The red fail LED is lit if a fault has occurred in the current supply.
 If the LED is blinking, there is no screen signal.