Lenze PC-based Automation Industrial PC - Manual (Page 149)

2.5 EN - 01/2012
L
149
Industrial PC | Parameter setting & configuration
Parameter reference
Parameters of standard devices
C0174
C0175
C0176
C0178
C0179
C0180
Parameter | Name:
C0174 | FTP: Enabled
Data type: UNSIGNED_32
Index: 24401
d
= 5F51
h
Activation of the FTP service
• Entering "1" activates the FTP service
• Entering "0" deactivates the FTP service
Setting range
(min. value | unit | max. value) Lenze setting
0 1 1
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0175 | Enable RAS server
Data type: UNSIGNED_8
Index: 24400
d
= 5F50
h
Activate or deactivate the RAS server
• Entering "1" (re-)starts the RAS server
• Entering "0" stops the RAS server
Setting range
(min. value | unit | max. value) Lenze setting
1
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0176 | RAS: Device name
Data type: UNSIGNED_8
Index: 24399
d
= 5F4F
h
Select the hardware required to establish remote access from the selection box.
Selection list
(Lenze setting printed in bold) Information
1 Hayes-compatible on COM1:
2 Hayes-compatible on COM2:
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0178 | RAS: Baud rate
Data type: UNSIGNED_32
Index: 24397
d
= 5F4D
h
Baud rate of the RAS device
Setting range
(min. value | unit | max. value) Lenze setting
19200
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0179 | RAS: Enable routing
Data type: UNSIGNED_32
Index: 24396
d
= 5F4C
h
Pass on RAS client data. An RAS client can, for instance, use the local area network to which the IPC is connected and
on which the RAS server is running.
Setting range
(min. value | unit | max. value) Lenze setting
1
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0180 | Telnet: Use authentication
Data type: UNSIGNED_32
Index: 24395
d
= 5F4B
h
The telnet user has to identify himself/herself with name and password when connecting.
• Entering "1" activates the log-in procedure
• Entering "0" deactivates the log-in procedure
Setting range
(min. value | unit | max. value) Lenze setting
0 1 1
; Read access ; Write access CINH PLC STOP No transfer