Lenze PC-based Automation Industrial PC - Manual (Page 46)

Industrial PC | Parameter setting & configuration
Web-based parameterisation with »WebConfig«
Requirements for working with the web-based parameterisation
46
L
2.5 EN - 01/2012
6. Select the User configured option.
• Enter the IP address of the Industrial PC (default address: <192.168.5.99>).
• Enter the subnet mask of the Engineering PC
(standard setting: <255.255.255.0>)
7. Close the individual dialog windows with OK or Close
The Properties of internet protocol (TCP/IP) dialog window

How to set the browser:
1. Open the browser at the Engineering PC
(This setting refers to the Microsoft Internet Explorer).
2. Select the Proxy settings dialog window
(ToolsInternet options ConnectionsSettingsAdvanced)
3. Position the cursor in the Exceptions field at the end of the entries available.
4. Enter the IP address of the Industrial PC:
<;172.31.217*> (example of the IP address of an Industrial PC, default address:
<192.168.5.99>)
5. Close the individual dialog windows with OK.