Lenze PC-based Automation Industrial PC - Manual (Page 127)

2.5 EN - 01/2012
L
127
Industrial PC | Parameter setting & configuration
Parameter reference
Structure of the parameter description
14.1.3.1 Parameters with a setting range
Description structure
14.1.3.2 Parameters with a selection list
Description structure
14.1.3.3 Parameters with a bit-coded setting
Description structure
14.1.3.4 Parameters with subcodes
Description structure
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Setting range
(min. value | unit | max. value)
Lenze setting
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Selection list
(Lenze setting printed in bold)
1
2
3
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Value is bit-coded:
Bit 0
...
Bit 31
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Setting range
(min. value | unit | max. value)