Lenze PC-based Automation Industrial PC - Manual (Page 153)

2.5 EN - 01/2012
L
153
Industrial PC | Parameter setting & configuration
Parameter reference
Ethernet interface (on board)
14.3 Ethernet interface (on board)
This chapter lists all parameters of the Ethernet interface (on board) of the
Industrial PC in numerically ascending order.
C0221
C0222
C0223
C0238
C0240
C0241
C0242
Parameter | Name:
C0221 | Device: Type key
Data type: VISIBLE_STRING
Index: 24354
d
= 5F22
h
Type key of the interface
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C0222 | Device: Type version
Data type: VISIBLE_STRING
Index: 24353
d
= 5F21
h
Version number of the interface
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C0223 | Device: Name
Data type: VISIBLE_STRING
Index: 24352
d
= 5F20
h
Device name of the interface
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C0238 | Apply IP configuration
Data type: UNSIGNED_16
Index: 24337
d
= 5F11
h
Code for activating the set configuration. The interface is activated by writing a "1".
Selection list
(Lenze setting printed in bold) Information
1 Activate device
0 No command
; Read access ; Write access CINH PLC STOP ; No transfer
Parameter | Name:
C0240 | Enable Dhcp
Data type: UNSIGNED_32
Index: 24335
d
= 5F0F
h
Activation of the configuration. DHCP states:
• "0" = Inactive
• "1" = Active
If DHCP is active, the codes 21-25 do not have any function
Setting range
(min. value | unit | max. value) Lenze setting
0 1 0
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0241 | IP address
Data type: VISIBLE_STRING
Index: 24334
d
= 5F0E
h
IP address of the interface
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C0242 | Subnet mask
Data type: VISIBLE_STRING
Index: 24333
d
= 5F0D
h
Subnet mask of the interface
; Read access ; Write access CINH PLC STOP No transfer