Lenze PC-based Automation Industrial PC - Manual (Page 68)

Industrial PC | Parameter setting & configuration
IPC backup & restore
Requirements
68
L
2.5 EN - 01/2012
1. Configure USB stick with »IPC Backup & Restore«" for Windows® XP.
– Requirements
( 68)
2. Boot up the Industrial PC with the connected USB stick.
3. Carry out backup, restore, or software update.
– Backup procedure ( 68)
– Restore procedure
( 71)
– Software update procedure
( 73)
9.4 Requirements
A USB stick has to be prepared appropriately for being used as a backup medium. For this
purpose you have to write a control file to the USB stick using the »IPC Backup & Restore«
tool under Windows® XP. When the Industrial PC detects a USB stick with this control file
while the operating system starts up, this USB stick is recognised as a backup medium.
Furthermore, you can set the backup behaviour by means of the control file.
For detailed information on the creation and configuration of a backup-capable USB stick,
please refer to the »IPC Backup & Restore« software manual.
9.5 Backup procedure
With the help of »IPC Backup & Restore« you can create a backup of the compact flash card
(CF card) on an accordingly prepared USB stick.
IPC
USB stick
Backup
Restore
CF card
Update

Note!
For carrying out a successful backup of the data of an Industrial PC a sufficient
amount of memory has to be provided on the USB stick!