Lenze PC-based Automation Industrial PC - Manual (Page 163)

2.5 EN - 01/2012
L
163
Industrial PC | Parameter setting & configuration
Parameter reference
Industrial PC extension modules
C1038
Parameters of interface 1, card has been installed in slot 1
C1073
C1081
C1082
C1090
Parameter | Name:
C1038 | Device: Manufacturing date
Data type: VISIBLE_STRING
Index: 23537
d
= 5BF1
h
Manufacturing date of the card
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1073 | Device: Driver index
Data type: UNSIGNED_32
Index: 23502
d
= 5BCE
h
Index of the device driver. Since there can be more than one CAN interface, several instances can be run via the
driver.
Display range
(min. value | unit | max. value)
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1081 | Sync master: Interface index
Data type: UNSIGNED_32
Index: 23494
d
= 5BC6
h
Note: Restart the IPC after changing this parameter!
Setting range
(min. value | unit | max. value) Lenze setting
4294967295
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1082 | Baud rate
Data type: UNSIGNED_32
Index: 23493
d
= 5BC5
h
Baud rate of the CAN interface. The value is assigned from a selection list.
Selection list
(Lenze setting printed in bold)
7 5
6 10
5 20
3 50
8 100
2 125
1 250
0 500
4 1000
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1090 | Tx PDO counter
Data type: UNSIGNED_32
Index: 23485
d
= 5BBD
h
PDO counter for sent CAN messages
Display range
(min. value | unit | max. value)
; Read access Write access CINH PLC STOP No transfer