beautypg.com

Arrow keys, Program key, Arrow keys -4 – INFICON MDC-360 Thin Film Deposition Controller User Manual

Page 22: Program key -4, Figure 2-3 programming section -4, Figure 2-4 arrow keys -4

background image

MDC-360 DEPOSITION CONTROLLER

Figure 2-3 Programming Section

2.3.8 ARROW

KEYS

The arrow keys are used to navigate through the programming and setup menu
structure. These keys will auto-repeat if they are held down for more than half a
second.

Figure 2-4 Arrow Keys

2.3.9 PROGRAM

KEY

Pressing the programming key will bring up the last viewed programming screen.
If a programming screen is already shown, nothing will happen. This key is also
used in conjunction with the Up and Down Arrow keys to adjust the contrast of
the Parameter/Status display.

FRONT PANEL DISPLAYS AND CONTROLS

2-4