Allied Telesis AT-S63 - Manual (Page 96)

Chapter 5: Enhanced Stacking
96 Section I: Basic Operations
3. From the Stacking Services menu, type 1 to select Get/Refresh List of
Switches.
The master switch polls the subnet for all slave and master switches
that are a part of the enhanced stack and displays a list of the switches
in the Stacking Services menu, as shown in the example in Figure 23.
Figure 23. Stacking Services Menu With List of Switches
The master switch on which you started the management session is
not included in the list, nor are any switches with an enhanced stacking
status of Unavailable.
By default, the switches are sorted in the menu by MAC address. You
can sort the switches by name as well. To do this, select option 2, Sort
Switches in New Order.
Note
Item 4, Download Image/Bootloader, downloads the AT-S63 image
from a master switch to another AT-9400 Series switch in the
subnet, as explained in “Downloading an AT-S63 Image File Switch
to Switch” on page 212. Item 5, Download Configuration, allows you
to download a configuration file from a master switch to another
AT-9400 Series switch in the subnet, as explained in “Downloading
a System File” on page 216.
4. To manage a new switch, type 3 to select Access Switch.
A prompt similar to the following is displayed:
Enter the switch number -> [1 to 24]
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Stacking Services
Switch Software Switch
Num MAC Address Name Mode Version Model
--------------------------------------------------------------------
01
00:00:00:12:34:30 Local Users Slave S63 v1.0.0 AT-9424T/SP
02 00:30:84:f3:b4:60 Engineering Slave S63 v1.0.0 AT-9424T/GB
03 00:30:84:54:02:60 Finance Slave S62 v1.0.0 AT-8524M
1 - Get/Refresh List of Switches
2 - Sort Switches in New Order
3 - Access Switch
4 - Download Image/Bootloader
5 - Download Configuration
R - Return to Previous Menu
Enter your selection?