Allied Telesis AT-S63 - Manual (Page 223)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 223
The System Administration menu is shown in Figure 4 on page 46.
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 53.
4. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 63 on page 207.
5. From the Downloads and Uploads menu, type 4 to select Upload a
File.
The following prompt is displayed:
Upload Method/Protocol [X-Xmodem, T-TFTP]:
6. To upload a system file using Xmodem, go to Step 7. To upload a file
using TFTP, do the following:
a. Type T.
The following prompt is displayed:
TFTP Server IP address:
b. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
c. Enter the directory path where you want the system file stored on
the TFTP server and a name for the file.
The following message is displayed:
Local File Name:
d. Enter the name of the system file on the switch that you want to
upload to the TFTP server. You can specify only one file. You
cannot use wildcards in the file name.
The following message is displayed:
Sending the file to Remote TFTP Server - Please wait
...
After the switch has uploaded the system file, the following
message is displayed:
File sent successfully!