Allied Telesis AT-S63 - Manual (Page 222)

Chapter 11: File Downloads and Uploads
222 Section II: Advanced Operations
Uploading a System File
You use the procedures in this section to upload a system file from a
switch to a computer or TFTP server. A system file can be any of the
following:
ˆ Boot configuration file
ˆ Public key
ˆ PKI certificate
ˆ Certificate enrollment request
Note
The certificate file, certificate enrollment request file, and key file are
supported only on the version of AT-S63 management software that
features SSL and PKI security.
This section contains the following two procedures:
ˆ “Uploading a System File from a Local Management Session” on
page 222
ˆ “Uploading a System File from a Telnet Management Session” on
page 225
Please note the following before you begin either procedure:
ˆ You can upload a system file from either a local or Telnet management
session. You cannot perform this procedure from a web browser
management session.
ˆ You can use either Xmodem or TFTP to upload a file from a local
management session.
ˆ You must use TFTP to upload a file from a Telnet management
session.
ˆ To use TFTP, there must be a node on your network that contains
TFTP server software.
ˆ If you are using TFTP, you should start the TFTP server before you
begin the upload procedure.
Uploading a
System File from
a Local
Management
Session
To upload a system file to a workstation from a Telnet management
session using Xmodem or TFTP, perform the following procedure:
1. Establish a local management session on the switch where you want
to upload the system file.
2. From the Main Menu, type 5 to select System Administration.